Variator Weights and CVT issues - Part II


This is an update of this post: 1986 Yamaha XC125 Riva - Variator Weights and CVT issues

So I took everything apart and found this: 


Notice the tear in the rubber: no good. Essentially, the primary sheave housing, which incorporates the weights I was hoping to replace, had burst at the seams. Taking it apart revealed that a few plastic sliders, which allow a plate to be pushed in and out by the weights inside the assembly, had burst into little pieces and torn the rubber seal. The seal is there because there is an unusually large amount of grease housed inside the sheave. Apparently, Yamaha is the only manufacturer that uses this type of 'wet' assembly, where all other manufacturers use a dry assembly.

Kahuna Powersports has recently decided to no longer be a Yamaha dealer, and so my neighbourhood parts supplier had suddenly become Snowcity Cycle Marine, which is much further away from me. Either way, I ordered my sliders from them, and the primary sheave cap was ordered from a kind gentleman (peteyb5) off of the Riva Riders forums. It was serendipitous, because we had been communicating regarding other parts, and he had listed off a few things that he had in stock, but I had no use for at the time. The light bulb went off in my head when I saw the torn sheave cap, and surely enough, he had mentioned that very part. He was kind of enough to sell and ship to me from the States at a considerable discount.

The grease that is packed into the sheave is something from Yamaha, known as Ultramatic grease. No one knows exactly what it is, but most people have good luck with other high-temp, waterproof greases. I opted for the Lucas X-tra Heavy Duty Grease, which met those requirements, for repacking.

I also received the Dayco 8231K belt, that I had measured out to be a particularly good fit my the Riva XC125 application.

I'm happy to say, that after receiving all the necessary parts, I've reassembled the scoot's variator with new weights, grease and cap, and then installed the new belt. The scooter is on its 350th kilometer right now with the new setup, and it's running great.

In all honesty, the top speed still isn't what it used to be, and I'll chock it up to engine wear at this point. When I have more leisure time on my hands (not to mention more disposable income), I'll keep the scoot alive by boring out the cylinder head and purchasing the OEM oversize piston and piston ring set. That'll liven everything up.

At this point, keeping the Riva alive has become a hobby on its own, and it's no longer about the necessity of transport. I want to keep her going, maybe to one day give it to my little sister.
Tuesday, July 16, 2013
Posted by Konstantine

crockTweet now also controls my 'Flower Pot Smoker' project.


A few posts ago, I described my attempt at building a PID controller for my Crock Pot to try my hand at Sous Vide cooking. It worked great, and in the process I made a PID controller that is an entirely separate unit and thus amenable to any later projects.

There's this excellent smoker on the market called the Big Green Egg, which is as expense as it is awesome. Its expense is enough for me to seek an alternative, which I found in Alton Brown's flower pot smoker, and some detailed instructions provided by another blogger. Two large 16" pots, a single burner and a day later I came up with this:

Single Salton portable burner, which I modified by
removing the hotplate and dremelling the outer perimeter
to fit the base of the pot.

The burner itself then fit nicely into the base of
the pot, which itself was seated into the burner's base.
A single bolt which held the burner in place was extended
to hold the whole thing together.

Here are the holes I measured out and drilled in the pot to
accommodate the burner's leads. The entire assembly is otherwise
in tact and plugs directly into my crockTweet PID box,
seen here on the right.

Here is the whole thing assembled. The temperature
probe is inserted at the top, and measures the dome temperature.
crockTweet PID regulates the whole setup to reach and
maintain my preset temperature for the duration of the
time I set it for.

Smoked sausages!

Whole chicken before.

Whole smoked chicken after.
Great success! The PID parameters needed to be tuned slightly to accommodate the new enclosure. Otherwise, everything was plug and play.
Friday, June 28, 2013
Posted by Konstantine

1986 Yamaha XC125 Riva - Variator Weights and CVT issues

So the little green scooter is starting to show its age. It's nearing 30 years old with ~35,000km on the road: a critical mileage where a lot of parts need to be attended to. I've noticed that although my acceleration has been steady, the top speed of my scoot has decreased drastically. In previous years, I was able to get up to 95kmph, but now I'm happy to see the speedometer creep past 79kmph.

A little research has shown that there are typically two culprits for this type of issue. Aside from regular engine wear, the scooter's continuously variable transmission has a few parts that require replacement to improve performance. A lot of how this nifty transmission system works can be found at this excellent forum post: "CVT Principles - How it works, how to improve it." 

Essentially the belt and variator weights need to be replaced. The principles of how they operate can be seen here:

As the weights wear and are no longer their appropriate weight, they can't push the clutch housing to its highest position, therefore preventing the belt from reaching its highest gear and reaching its top speed. The belt itself is also worn enough that it can no longer achieve this.

Easy enough, replace the belt and the weights and we're all set, right? Except that the scooter is almost 30 years old. And as you can see on the Riva Riders Yahoo Group, there's a lot of discussion about the dwindling state of parts available for these great machines.

The weights in the XC125 from '86 to '01 measure 18x12mm and weigh 9.5grams. I found suitable aftermarket replacement at Chinese Motorcycle Parts Online (part RW147) where they carry 18x12mm 9gram weights. Slightly lighter weights will still sacrifice top speed for acceleration, but these will still substantially improve my top speed over the worn out weights I currently use. The weights are shipped from the UK, and I received them here in Canada within a week of ordering them. 

A little bit of quality control shows that the weights are manufactured quite well, and they should fit the bill nicely. We would expect 6 x 9gram weights to weigh in at 54 grams. I used a sensitive scale and indeed: six of them weighed in at 54.0670 grams. The height tended to be slightly larger than 12mm and the width slightly less than 18mm, but we're talking 10ths of a mm here: not an issue.





The belt that I need to replace is a Yamaha part number 50W-17641-00-00. The OEM belts are available, but retail for $150 here in Canada from Yamaha dealers. Too much for a simple v-belt. There is an aftermarket supply for these belts through the Gates Worldwide, a belt manufacturer. They run the Gates' Boost Belt Programme which lists part number 9802-21205 as the direct replacement for the Yamaha part number. It costs 20 Euro (~30CAD)! Gates hasn't been helpful when I called and emailed them numerous times to obtain more information and see if I can order it from them. I found a dealer in Madrid, Spain, who has been trying to sell me the belt, but requires me to wire him the money, something that costs as much as the shipping and part together. Other options are being pursued.

The other issue is that there are not standard belt measurements available for this part. Most of the measurements are hearsay and unconfirmed. The other issue is that aftermarket manufacturers who list sizes (length, width and angle of belt) tend to list these figures in a non-standardized way. It's not conducive to finding an appropriate replacement. The hearsay numbers for the Yamaha OEM belt floating around are that it is 940mmx19mmx9.5mm with a 28 degree V. Again, this is unconfirmed. Dayco in Australia produces belts that are of a similar size (part 8231K), but it is unknown if this actually fits, as it does not cross-reference with the Yamaha part number, but instead is listed for a SYM HD200. Dayco has been kind enough to offer sending me a sample so I may test it out. We'll see what happens.

Updates to come!
Friday, June 21, 2013
Posted by Konstantine

@crockTweet: Programmable Arduino-Powered PID Sous Vide Slow Cooker


I purchased a very simple slow cooker ($20 at duty free!) a few months ago, which has four settings: High, Low, Keep Warm, and Off.

Most dishes prepared in the slow cooker will cook from 4-8 hours, depending on the setting used. There are a few issues though:
  1. There is no true control of the cooking temperature. 
  2. There is no automated way to switch from one setting to another (e.g. 8-hours of cooking on 'High' followed by 3-hours of 'Keep Warm').
A simple timer attached to the cooker's power plug would allow me to control the total cooking time, but not switch to a new setting, nor would it allow me to precisely control the temperature.


Some more advanced models of slow cookers allow for automated switching of settings, but have no way of notifying me of these things. 

Enter Arduino: an electronics prototyping system that allows the user to interface with the real world through sensors and react to this information based on scenarios coded onto the board through a programming interface.

In the case of the slow cooker, I wanted to use the Arduino to allow me to:
  1. Detect and control the temperature inside the slow cooker based on preset values.
  2. Control the amount of time the slow cooker spends at a selected temperature.
  3. Allow for a multi-step cooking (e.g. 8-hours of cooking on 'High', 4-hours of 'Low', 2-hours of 'Keep Warm').
  4. Tweet the progress (e.g. When the a new process starts or finishes).
I made a quick video of my progress as of last week:


I just finished coding everything, and I theoretically have the ability to do everything I want, except for Tweeting (still waiting for the network interface to arrive in the mail). The nice thing is that this system will work with any slow cooker, as it required no modification of the slow-cooker itself. I will be controlling its on/off state through a solid-state relay controlled by the Arduino, thereby controlling its temperature.

I will be testing everything out tomorrow morning.

Here's my Arduino code:



There is still tuning of the PID parameters to do once I hook everything up, but once that's done, I will post more.

Currently the list of items required for the project (aside from the slow cooker):
  • Arduino UNO Board
  • LCD 20x2 Display
  • DS18B20 Temperature Sensor
  • 20K POT
  • SPST Buttons
  • Breadboard
  • Assorted Resistors
  • Assorted Wires
Stay tuned!


Stuff to read about:
Friday, January 25, 2013
Posted by Konstantine

Letter of Intent for Master of Science in Cell Biology

I thought I would do a favour for any prospective graduate students who are looking for a guiding hand in writing their letter of intent, also known as a statement of interest. This letter got me into the graduate program of my dreams at a top university and a lot of effort was put into crafting it.
This is not a generic letter, and likely not one that will be easily adapted to your own case. It is very specific to my own program and background and, in the end, yours should be too.
It is with great pleasure that I submit my application for a position as a master’s student with the Department of [personal detail] at the University of [personal detail]. Having completed my undergraduate degree in honours biological sciences at the University of [personal detail], I now seek to gain a more thorough understanding of the skills and knowledge necessary to be successful in a research-oriented environment. Through my continued work with Dr. [personal detail], I am convinced that his guidance and support will ensure that I achieve these pursuits.
Graduate school became an earnest consideration after upper-level undergraduate courses ignited my curiosity in the dynamic area of systems biology. The appeal was born out of the discipline’s emphasis on integration of different scientific fields, with the express goal of understanding biological systems as more than the sum of individual parts. My undergraduate education has exposed me to the reductionist and static approach of understanding biological elements and processes; I now wish to understand how these parts work in concert as elements of a greater system.
I am primarily interested in applying the methods and techniques of biophysics and genetics to elucidate the relationship between sensory behavioural phenotype and genotype. My previous volunteer experience with the maintenance of Caenorhabditis stocks has shown me first-hand that these deceptively simple organisms have complex behavioural characteristics. My current work as a research assistant at Dr. [personal detail]'s laboratory involves the analysis of these behaviours through novel methods devised in-house at the instrumentation, imaging and analysis level. I have combined two passions in one place in this environment: my love of the study of nature at the biological level, and the innate inclination I have toward the technical. This research aims, generally, to answer questions about what it is, genetically and neurobiologically, that makes animals move and behave the way they do. This research is engaging, challenging and fulfilling to a degree previously unknown to me. I feel there is a great wealth of knowledge to be obtained from this fusion of technology and biology, and wish to be a part of the research that centers about it under the supervision of Dr. [personal detail].
Apart from my experiences at the [personal detail] Lab, my recent role as a lab technician at the University of [personal detail]'s [personal detail] Lab has underscored the versatility of the skills I have acquired thus far, and my propensity for acquiring new ones. In the [personal detail] Lab, I was responsible for the continued organization, recovery and systematic freezing of a large backlog of nematode strains, and for the optimization and troubleshooting of procedures associated with automated robotic equipment. These skills earned me the reference to Dr. [personal detail], who has since hired me. Additionally, my experience as a research assistant at the [personal detail], which involved using degraded DNA to construct phylogenetic trees of a model organism, made clear that my patience, tenacity and initiative are an excellent fit in the lab environment. I have also conducted research completely of my own design, at the organism level, by studying the behavioural effects of varying auditory stimuli on the Passer domesticus species. The stimuli were studied as they related to the birds’ feeding habits, with the guidance and final commendation of the ornithology department head, Dr. [personal detail]. These experiences, coupled with the upper-level courses I have taken, ultimately convinced me of my desire to pursue graduate studies to fulfill my interests in conducting novel research.
Having now worked alongside graduate students in several laboratories, I am aware of the heavy workload and demanding schedule that graduate studies entail. As an undergraduate, I worked a job 25 hours a week while studying full time for my BSc degree, which has taught me the art of prioritizing my time; a skill that will no doubt help me face the rigours of graduate school. The reasoning abilities I have developed through my coursework—in particular the ability to think logically and critically fostered by my minor in philosophy—will also be an asset.
I am convinced that the University of [personal detail] is the most appropriate venue for my studies, and that I can rise to meet the challenges that this will involve. I appreciate your consideration of my application, and I look forward to hearing back from you.

Best regards,
Konstantine Palanski
Friday, June 24, 2011
Posted by Konstantine

Scooter Adventure — Part II

Photobucket

I'm alive! My GPS is to thank, along with my perseverance and notably hardened buttocks. To keep you guys from an onset of ennui, I'll limit this post to little detail.

The entire trip, as per GPS, took 780km to complete. Here is a quick break down of expenses and mileage:
  • Gas: $25.14
  • Food and beverages: $68.57
  • Entertainment: $24.87
  • Lodging: $101.92
  • Mileage: 3.03L per 100km
Roughly, this is the route I took:


View Larger Map

The path I took deviated substantially from my initial plans, mostly due to the fact that was I making such incredible time. Arrival and two hours worth of hiking at Rondeau Provincial Park spurred me to continue on my journey and find a better place to set up camp for the day. I was fortunate enough to end up in Long Point Provincial, which has to be among the top three parks I have visited in Ontario. Here's my beachfront camping site. I was in heaven.

Photobucket

An immense amount of pride went through me when I finally arrived in Toronto. The fact that the scooter performed without so much as a hiccup was the main source of this, since I rebuilt and repaired it myself from a non-running state a few years ago.
Photobucket

On a scooter, no less, I've discovered what the open road feels like.
Monday, July 12, 2010
Posted by Konstantine

Filling The Gaps: Scooter Adventure

Photobucket

Boy do I have a lot of gaps to fill. My absence (hiatus?) had good reason, but now I would like to share some of my adventures once more. It's been a whirlwind for the past half a year and my escapades continue. I'll start with the most pertinent and pressing thing in my life: my move to Toronto and my accompanying three day scooter trip.

This seems like it will be a long and convoluted story, so I'll do my best to refrain from embellishment here. The main idea is that I have graduated from university, have decided that there are more opportunities for me back in my home city of Toronto and have already moved all of the belongings there. I am leaving my car behind in Windsor due to the fact that I will have a wonderful public transport system at my disposal, as well as my scooter. Hence, the scooter trip. And what a trip!


View Larger Map

My main stops will include Rondeau Provincial Park, Big Creek National Wildlife Area and Hamilton's scenic areas. I'm taking a few changes of clothes, DSLR camera, tripod, single-person tent and a few other supplies for the full trip. A little crazy, sure. But it'll make for a great story to tell my grandkids, no?
Friday, July 2, 2010
Posted by Konstantine

Life After Google and Wikipedia

Photobucket
A life before Google and Wikipedia. Seems unimaginable doesn't it? I cannot count the amount of debates I have settled, the amount of questions I have answered and the amount of frustration I have avoided simply by having access to what I see as the accumulation of all human knowledge. And all of it at available my fingertips. The difference is, I know what is an acceptable source, while many don't (see Yahoo! Answers).

Information used to be a difficult thing to access, almost prohibitively so—ask your parents. Not one generation ago, one would have to go comparatively great lengths to find out, well, anything. Small, limited, avenues of information were the source of knowledge. An educated person was thereby valued.

Nowadays, the task isn't so much about locating the information, as it is about sifting through it. There is so much of it out there, so much of it junk, that one can easily get lost in it. Be mislead. To understand what is an acceptable source falls on the shoulders of the reader, much as it has in the past with books, but to a much greater extent. Critical thinking skills become infinitely more important. The value shouldn't lie just with the education person, but also with one who is able to understand what information is valid. One who is capable of sifting through the bullshit. This is becoming increasingly difficult to come by.

Our problem is that not enough people are employing these skills when they access the vast amount of information now available to them. They accept as truth the first thing they come across. David Dineen-Porter, a fellow skeptic amongst other things, put it eloquently in a message to me, describing what he coins as "naive expertise."
It's the syndrome where people with access to cursory and superficial information, and without the expertise to analyze it properly, and then to place it in context of a much broader data set (which they have never accessed), believe themselves to be experts in that field. Reading a pamphlet doesn't make you an expert on vaccines.
Such is the problem that we now have to deal with: everyone fancies themselves an expert.
Monday, February 8, 2010
Posted by Konstantine

CBC Test The Nation: IQ — Part VII

Photobucket

So, for the preliminary roundup—the atheists came in third place! We were ahead of twins, believers and contact sports athletes, but behind nerds and politicians, sadly. However, one of our team members, Kevin Kindred, ended up being the highest scoring individual on the show. Kudos to the man!

The results were judged entirely by average IQ results, it seems. I am particularly interested to see if I can find the margin of error for each average in the raw data (if I can obtain it). The average results were close enough to each other that I am skeptical as to their statistical significance. If the margins of error between each group overlap, it is unlikely that there is any actual significant difference. Hopefully, I will get my hands on the raw data for the groups and run it through some tests. The strictly scientifically significant results may not by quite as sensational as those a television show would hope for and have thus been omitted. Averages look so much more exciting, for comparative reasons.


PhotobucketPhotobucketPhotobucketPhotobucket

Other than that, the evening was quite amazing. Before the show, the teams were seated at separate tables in the same large hall. During the three-hour wait time before the show, a few people from the atheist team, including myself, took the opportunity to walk around and introduce ourselves to the rest of the teams. The eclectic group of individuals was fascinating to talk to. Of note was Elizabeth May, leader of the Green Party, who quickly asserted her stance as a believer, but just as quickly made note of her daughter, who is an atheist. On the other end of the spectrum, one chat with a conservative politician ended up in a fiasco of sorts, which I was not a part of, but will link to later when I obtain Justin Trottier's take on it.

There are many Canada-wide results that I want to sift through and detail in a later post. If you would like to look through these results yourself, they are available here.

Again, I would like to express my gratitude to the CBC and Shannon McKinnon, the associate producer of the show, for the opportunity of being part of the team representing the atheists in Canada.


Here is the link to the full show for those of you who missed it:


Tuesday, January 26, 2010
Posted by Konstantine

CBC Test The Nation: IQ — Part VI

Photobucket

What an exciting show! I will detail a lot more about the experience tomorrow, but seeing as I have been busy with transporting myself to Windsor today, I am spent. Here is the link to the full show for those of you who missed it:

Monday, January 25, 2010
Posted by Konstantine

CBC Test The Nation: IQ — Part V

For those of you who don't know, I will be on the team representing Canadian atheists tomorrow night at 8pm, on CBC Television. The show is called Test The Nation: IQ. I am arranging for the broadcast to be recorded so as to republish it somewhere online afterward.

I am still unsure of what to expect, but at least I know this is legitimate, as I have been recorded as one of the atheist team's official members on the website. There are some very exciting people to meet come tomorrow (Marc Garneau, George Strombolopolous, Elizabeth May). Hopefully I will get a few autographs if the opportunity presents itself.

I will do my best to tweet about the experience throughout tomorrow—follow along: twitter.com/palanski
Saturday, January 23, 2010
Posted by Konstantine

CBC Test The Nation: IQ — Part IV

Photobucket

Exciting stuff!

I have received what appears to be the final email from CBC detailing exactly what I am expected to do come Sunday afternoon and evening. Looks like the only thing I really have to worry about is doing my own makeup. As I have never put on any makeup, I think I will attend the live shoot au naturel and hope for the best. The only restrictions on clothing are no stripes, checkered patterns, white tops or tops with large logos. It seems that most of the show will be minimally interactive, but there is promise of the hosts chatting with members of the teams throughout.

I cannot wait for the weekend already.
Monday, January 18, 2010
Posted by Konstantine

CBC Test The Nation: IQ — Part II


Although it seemed mostly official in an earlier post I made, it became entirely bona fide news yesterday: I will be part of a team representing Canadian atheists on CBC's Test the Nation IQ TV show, which is scheduled to air live on Sunday, January 24th, at 8pm.

Here is part of the final email that I received from the producer of the show.
Hello Atheists!
Thanks so much for your patience - we have narrowed down the teams, and if you are on this email you are a part of the LIVE national broadcast of Test the Nation: IQ!
The event takes place at the CBC studios on Sunday, January 24th. The show airs LIVE at 8pm, and we start bringing the teams earlier [than that].

[..]
I can't wait to meet you all!! You will be a tough team to beat, I think. Do not hesitate to contact me with any questions or concerns you might have.
Congrats on making it onto TTN:IQ!
All the best,
Shannon
I am excited not only for the television show itself, but to meet George Stroumboulopoulos, who will be a co-host of the show. Having had grown up watching him on MuchMusic as a VJ and the following him as he became a successful talk show host on 'The Hour', I feel I will be lucky to meet him.

Apart from all the niceties, there's already some interesting rivalry and stereotyping showing itself. Meet Justin Trudeau and his response to one of the questions asked of him as a representative of the politicians:
6. Anything to say to the other teams?

I am a nerd, and an athlete, and a believer. So I can't trash talk my own kind, and I won't trash talk twins, because while I'm going after one, the other'll sneak up behind and smack me, and as for the atheists, well, they won't believe anything I have to say to them anyway, so what's the point?
Inanity and segregation apart, as the 'Opposition Critic for Youth and Multiculturalism', I would like to point out the following chart and news article:

Photobucket
Get your demographics straight, good sir—there's a good chance both of those twins are atheists, plotting to 'sneak up and smack you', even if they are not teenagers. Oh wait, I even found some atheist twins that will be on the show. Yikes.
Friday, January 8, 2010
Posted by Konstantine

CBC Test The Nation: IQ

Photobucket

It seems to be official. I will be one of the representatives for Canadian atheists on January 24th of next year on a television show called CBC's Test the Nation: IQ. Here is the original call for casting and information about the upcoming show.
Hello - CBC is casting a team of Atheists for a live, national quiz show called 'Test the Nation'!

Test the Nation is a live two-hour special that surveys six in-studio teams as well as viewers across the country. This year, we are bringing back the popular first season with another IQ test. For more information on the program, please go to www.cbc.ca/testthenation

To start off, let me assure you that the individual IQ scores of participants writing the test will not be revealed - except that of the person with the highest IQ. Otherwise, we reveal only the average scores of general categories such as women vs. men, hair colour, and so on.

There will be six teams of 30 people participating in studio and thousands of Canadians participating online. The idea is to test society’s preconceived notions of intelligence based on occupation or area of interest. In our original Test the Nation: IQ (which aired in 2007) we had an audience of 1.5 million viewers.

In addition to a team of well-known federal and provincial Politicians, we are looking at testing Contact Sports athletes (do multiple concussions affect IQ), the "nerd" stereotype as a fun team (Star Trek fans, comic book fans), twins (do multiples have similar IQs) and whether being religious has any correlation to IQ. (some studies have found that people with higher IQs do not have any religious beliefs). That would make our six teams the following - Politicians, Athletes, Twins, Nerds, Religious Leaders, and Atheists.

It's going to be a great show, and team selection is generating lots of interest. Please let me know whether you would be interested and available to take part on Sunday, January 24 in our Toronto studio.

Best Regards,

Shannon McKinnon
Associate Producer,
Test the Nation: IQ
CBC
Exciting, yes?
Friday, December 11, 2009
Posted by Konstantine

Metabolism Mnemonics

Photobucket


Currently, I am studying for two midterms, one of which is concerned with cellular metabolic pathways and their mechanisms. Glycolysis and the citric acid cycle (known also as the Kreb's cycle, the TCA cycle or the Szent-Györgyi-Krebs cycle) are of main concern at the moment. I thought I would publish the mnemonic devices I use to memorize these pathways and their associated enzymes here, both for my own future reference and the use of anyone who needs them:

Glycolysis —

Steps of glycolysis:
Goodness Gracious Father Franklin Did Go By Picking Pumpkins to Prepare Pie
Thus, the first emphasized letter of each of the above emphasized words relates to the following steps in glycolysis:
Glucose
Glucose-6-Phosphate
Fructose-6-phosphate
Fructose-1,6-biphosphate
Dihydroxyacetone phosphate (DHAP)
Glyceraldehyde-3-phosphate
1,3-Biphosphoglycerate
3-Phosphoglycerate
2-Phosphoglycerate
Phosphoenolpyruvate
Pyruvate
The enzymes involved in the above steps can be remembered with the following memory aid:
High Profile People Act Too Glamorous, Picture Posing Every Place
Again, the first emphasized letter of each of the above emphasized words relates to the following enzymes involved in the above steps in glycolysis:
Hexokinase
Phosphofructo isomerase
Phoshofructokinase
Aldolase
Triose phosphate isomerase
Glyceraldehyde-3-phosphate dehydrogenase
Phosphoglycerokinase
Phosphoglyceromutase
Enolase
Pyruvate kinase
Pyruvate Dehydrogenation Complex (PDC) —

Cofactors most important to the pyruvate dehydrogenation complex:
TLC? Fuck No.
This corresponds to:
E1:
TPP

E2:
Lipoic Acid
Coenzyme A

E3:
FAD
NAD+
Citric Acid Cycle —

Compounds involved in cycle:
Our City Is Kept Safe and Sound From Malace
This corresponds to:
Oxalacetate
Citrate
Isocitrate
Alpha-ketoglutamate
Succinyl-coA
Succinate
Fumarate
Malate
Enzymes involved in cycle:
CAIK Sounds So Fucking Mint.
This corresponds to:
Citrate synthase
Aconitase
Iso-citrate dehydrogenase
Alpha-Ketoglutarate dehydrogenase
Succinyl-coA synthetase
Succinate dehydrogenase
Fumerase
Malate dehydrogenase
Urea Cycle —

Compounds involved in cycle:

Ordinary Careless Crappers Are Also Frivolous About Urination

This corresponds to (indented steps are either requirements or products of that step):
Ornithine
Carboamyl Phosphate
Citruline
Aspartate
Argininosuccinate
Fumarate
Arginine
Urea
Enzymes involved in cycle (OAAA are the enzymes responsible for the indented steps above):

C—OAAA
Carboamyl phosphate synthase
Ornithine transcarbamoxylase
Argininosuccinate synthase
Arginininosuccinase
Arginase
Hope these come to good use.
Monday, October 5, 2009
Posted by Konstantine

Ecotoxicology Presentation

I know this may be incredibly boring, but I thought I would share the keynote presentation that I did yesterday for my ecotoxicology class at the university. I presented two papers that concentrated on the biomagnification, recycling and storage of persistent organic pollutants in organisms such as mysids and amphipods.

I was very excited to do the presentation, which lasted approximately thirty minutes. Unfortunately, there really isn't much to the above video without me narrating it, but I thought I would share anyway.

Saturday, September 26, 2009
Posted by Konstantine

Why A Broken Heart Really Does Hurt

None

An interesting article to finish up science week on the nook. This one really won't need too much of an introduction as the title says it all—a broken heart really does physically hurt. Here is the full excerpt from the above-linked layman's version of the scientific paper:
Scientists have identified a genetic link between physical pain and social rejection, a finding that explains the common theory that being spurned or breaking up with a lover really "hurts". In a landmark research, psychologists at the University of California, Los Angeles, found that the human body has a gene which connects physical pain sensitivity with social pain sensitivity.

The research, published by the Proceedings of the National Academy of Sciences, backs the commonly held theory that rejection "hurts" by showing that a gene regulating the body''s most potent painkillers—mu-opioids—is involved in socially painful experiences too. "Individuals with the rare form of the pain gene, who were shown in previous work to be more sensitive to physical pain, also reported higher levels of rejection sensitivity and showed greater activity in social pain-related regions of the brain when they were excluded," said Prof Naomi Eisenberger, the study co-author.

The study indicates that a variation in the mu-opioid receptor gene (OPRM1), often associated with physical pain, is related to how much social pain a person feels in response to social rejection, the Daily Telegraph reported. "These findings suggest that the feeling of being given the cold shoulder by a romantic interest or not being picked for a schoolyard game of basketball may arise from the same circuits," said co-author Baldwin Way.

According to Prof Eisenberger, this overlap in the neurobiology of physical and social pain makes perfect sense.
When news like this comes out, I usually like to dig up the original scientific paper so I can study it more thoroughly. If one thing ever holds true, it is that the media does a terrible job of representing scientific findings in a large percentage of their published stories. On top of that, the media never make it easy to find the original article from which they cite their information—they instead leave puzzle pieces for you to fit together. Maybe I ask too much. Either way, after some searching, I found the original, which can be downloaded here. The paper's abstract delves a little deeper into the mechanisms connecting emotional and physical pain associated with a broken heart:
Scientific understanding of social pain—the hurt feelings resulting from social rejection, separation, or loss—has been facilitated by the hypothesis that such feelings arise, in part, from some of the same neural and neurochemical systems that generate the unpleasant feelings resulting from physical pain. Accordingly, in animals, the painkiller morphine not only alleviates the distress of physical pain, but also the distress of social separation. Because morphine acts on the μ-opioid receptor, we examined whether variation in the μ-opioid receptor gene (OPRM1), as measured by the functional A118G polymorphism, was associated with individual differences in rejection sensitivity. Participants (n = 122) completed a self-report inventory of dispositional sensitivity to social rejection and a subsample (n = 31) completed a functional MRI session in which they were rejected from an online ball-tossing game played with two supposed others. The A118G polymorphism was associated with dispositional sensitivity to rejection in the entire sample and in the fMRI subsample. Consistent with these results, G allele carriers showed greater reactivity to social rejection in neural regions previously shown to be involved in processing social pain as well as the unpleasantness of physical pain, particularly the dorsal anterior cingulate cortex (dACC) and anterior insula. Furthermore, dACC activity mediated the relationship between the A118G polymorphism and dispositional sensitivity to rejection, suggesting that this is a critical site for μ-opioid-related influence on social pain. Taken together, these data suggest that the A118G polymorphism specifically, and the μ-opioid receptor more generally, are involved in social pain in addition to physical pain.
In order to practise what I preach, here is the citation:
Way, Baldwin M., Shelley E. Taylor, and Naomi I. Eisenberger. "Variation in the μ-opioid receptor gene (OPRM1) is associated with dispositional and neural sensitivity to social rejection." Proceedings of the National Academy of Sciences (August 2009).
Friday, August 21, 2009
Posted by Konstantine
Tag :

Leamington Triathlon - Part VI

None

The official results are in. Again, the triathlon consisted of a 750m swim, 30km bike ride and a 5km run, done consecutively.

  • Overall Place - 76/76
  • Bib - 187
  • Name - Konstantine Palanski
  • Total Time - 1:52:14
  • Class Placing - TM20-24 5/5
  • Swim Place - 76/76
  • Swim Time - 37:08
  • Pace/100m - 4:57
  • Bike Place - 67/76
  • Bike Time - 48:20
  • Average Speed - 24.8 km/h
  • Run Place - 48/76
  • Run Time - 26:46
  • Pace/km - 5:22
As is quite obvious, the swimming winded me. However, by the time I was biking and running, I was back up at a competitive level. Swimming lessons, here I come.

Saturday, June 27, 2009
Posted by Konstantine

Leamington Triathlon - Part V

None

Die I did not! For the first time in my life I can honestly say that I am happy about coming in last place, approximately 52 minutes behind the top finisher, who completed the triathlon in just under one hour.

As expected, the swim portion (750m) was what slowed me down. Apart from being underprepared for that portion of the triathlon, the open water at Leamington harbour (murky, seaweed ridden, unfamiliar) did not do much in the way of facilitating an easy swim. Excuses aside, I concede to needing swimming lessons; I am a weak swimmer at this point, but I know that I can improve vastly given the right training. I will be looking into them soon, as I wish to participate in the next Windsor-area triathlon, taking place in late August. The biking and running portions were a piece of cake, especially with the short distances involved (30km bike, 5km run) and I enjoyed them to a much larger degree.

Overall the experience was priceless and I can honestly say that I am proud of myself for not giving up, even when given ample opportunity to do so. I cannot wait to try my hand at another one of these events, especially when I know there is so much room for improvement.

Sunday, June 21, 2009
Posted by Konstantine

Leamington Triathlon - Part IV

None

The Leamington Spring Triathlon is tomorrow and there's no two ways around it; there is a good chance I may die tomorrow during the swim portion of the triathlon. I feel remarkably unprepared for swimming 750m and have been caught off guard by this, considering the generally good shape I am in and the training I have been doing. I did not consider the time scale since the Bike Trek, thinking a month would be enough time to train, or the necessary inclusion of a swim coach. Lessons learned for next time! The good thing is that I have whet my appetite for swimming, a sport that I will undoubtedly be pursuing in my attempt to lead a fit lifestyle.

I am still looking forward greatly to tomorrows event and will do my best. Finishing somewhere in the middle of the pack is the goal at this point, winning is not.

Wish me luck!

Saturday, June 20, 2009
Posted by Konstantine

Popular Posts

Powered by Blogger.

About Me

My Photo
I was born in Poland, raised in Ukraine, identify myself as Russian and now reside in Canada. How's that for an identity crisis?

- Copyright © k.p.nook -Metrominimalist- Powered by Blogger - Designed by Johanes Djogan -